Pool Filtration System Sizing Calculator
Calculate the required pump flow rate, turnover time, and filter size for a swimming pool filtration system based on pool volume and usage type.
Formulas Used
1. Pool Volume (gallons):
Volume (ft³) = Length × Width × Average Depth
Volume (gal) = Volume (ft³) × 7.48052
2. Required Flow Rate:
Flow Rate (GPM) = Pool Volume (gal) ÷ (Turnover Time (hr) × 60)
3. Pump Flow Rate (with safety factor):
Pump GPM = Flow Rate (GPM) × 1.10
4. Filter Area:
Filter Area (ft²) = Flow Rate (GPM) ÷ Filter Rate (GPM/ft²)
5. Pipe Diameter:
Pipe Area (ft²) = Flow Rate (ft³/s) ÷ Velocity (ft/s)
Diameter (in) = √(Pipe Area ÷ (π/4)) × 12 [target velocity = 8 ft/s]
6. Pump Horsepower:
HP = (Pump GPM × TDH) ÷ (3960 × Pump Efficiency)
[TDH = 50 ft residential, 60 ft commercial; Efficiency = 0.75]
Assumptions & References
- Turnover rates per ANSI/APSP-15 and Model Aquatic Health Code (MAHC): residential 6 hr, semi-commercial 4 hr, commercial 2 hr, wading 1 hr.